As an atPortfolio Single Pagetractive alternative to traditional formwork, its significant benefits are:
Durable

PP hollow plastic formwork is high strength, impact resistance, wear resistance and other excellent properties, and has a long service life. After repeated use, the strength and shape of the formwork can still be maintained well, and the number of reuses can reach more than 50 times, which greatly reduces the construction cost.
Easy to process
The formwork material can be cut, planed, nailed, etc. according to actual requirements, which is convenient for customized processing according to engineering requirements and improves construction flexibility.
Easy to operate
PP hollow plastic formwork is light in weight, easy to carry and operate, and construction workers can more easily build and dismantle the formwork, which greatly improves construction efficiency and saves time and labor costs.
Safety and reliability
PP hollow plastic formwork does not absorb water, is corrosion-resistant, acid-resistant, and has a smooth surface, avoiding deformation, decay, and other problems that may be caused by traditional wooden formwork. And no mold release agent is required during use.
Environmental protection
PP material is a thermoplastic plastic with excellent recycling performance. The formwork after the end of its service life can be completely recycled and reused, reducing resource waste.
The cost of PP hollow plastic building formwork can be greatly reduced compared to traditional wooden formwork.

Features And Characteristics Of PP Hollow Formwork:
The hollow building formwork has good machinability and is basically consistent with the wood formwork construction method.
Hollow building formwork is non-hygroscopic, corrosion-resistant, acid and alkali resistant, especially suitable for use in humid environments.
Hollow building formwork has high strength, impact resistance, wear resistance, long service life, and turnover times up to 40 times.
Hollow building formwork surface Smooth, smooth, no need to apply mold release agent, can be sawed, can be stapled, can be used together with wood formwork; used scrap boards and scraps can be recycled and reused, saving cost and reducing pollution.
PP Hollow Formwork Method Of Using:
The method of use is the same as that of the wooden formwork. The direction of the vertical ribs of the hollow building formwork forms a cross shape with the direction of the wood.
No need to apply mold release agent before use.
When the cast-in-place plate is used, the distance between the keels is 20~25cm, and the distance between the keels of the plate wall is 15~20cm.
The joint between the board and the board needs to be sealed with tape.
the length of the nail should not be too long, generally about 30 ~ 35mm.
Nail strength should be moderate.
When removing the mold, it is necessary to carry out the small piece from one end, and remove the template while dismantling the support to prevent large areas from falling, and do not let the corners fall perpendicularly to the ground.
The template can be mixed with wood plywood, bamboo glue board and other material plates.